TM 9-2320-366-20-5
18-3. WINDSHIELD WIPER AND NOZZLE REPLACEMENT (CONT)
(3) Install wiper (6) on wiper blade (7).
(4) Install clip (8) on wiper blade (7).
(5) Install wiper blade (7) on wiper arm (3).
d. Installation.
NOTE
All windshield wipers are installed the same
way. Left side shown.
(1) Position wiper arm (1) on wiper arm shaft (2).
(2) Lift cover (3) on wiper arm shaft (2).
(3) Position spring washer (4) and nut (5) on wiper arm shaft
(2).
(4) Tighten nut (5) to 120-168 lb-in. (14-19 Nm).
(5) Snap cover (3) in place on wiper arm (1).
(6) Connect windshield washer hose (6) to fitting (7).
e. Follow-On Maintenance.
Operate windshield wipers and check for proper operation
(TM 9-2320-366-10-1).
End of Task.
Change 1
