TM 9-2320-366-20-5
18-4. WINDSHIELD WIPER MOTOR REPLACEMENT (CONT)
(7) Remove three screws (10), washers (11), wiper motor
(6), and wiper motor bracket (12) from vehicle.
b. Installation.
(1) Position wiper motor (1) and wiper motor bracket (2) on
vehicle with three washers (3) and screws (4).
(2) Tighten three screws (4) to 96-120 lb-in. (11-14 Nm).
NOTE
Use orientation noted from removal of wiper
arm.
(3) Install wiper arm (5) on wiper motor (1) with washer (6)
and self-locking nut (7).
NOTE
Install plastic cable ties as required.
(4) Connect connector PX22 (8) to wiper motor (1).
18-10
