TM 9-2320-366-20-5
Section II. MAINTENANCE PROCEDURES
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Cleaning Compound, Windshield (Item 15,
Grommet, Nonmetallic (Item 51, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
a. Removal.
(1) Turn screw (1) to the left to unlock cab step tread (2).
(2) Remove two nuts (3), washers (4), and screw (5) from
cab step tread (2).
NOTE
Screw will remain attached to cab step.
(3) Remove cab step tread (2) from screw (6).
(4) Remove strap (7) from two brackets (8).
(5) Disconnect connector J25 (9) from connector P25 (10).
(6) Disconnect connector P125 (11) from windshield washer
pump (12).
