TM 9-2320-366-20-5
17-32. 30K WINCH VALVE MANIFOLD ASSEMBLY REPLACEMENT/REPAIR (CONT)
e. Installation.
(1) Position valve manifold assembly (1) on 30K winch
assembly (2) with two screws (3), washers (4), and
self-locking nuts (5).
(2) Tighten two self-locking nuts (5) to 12-24 lb-in. (1-3
Nm).
NOTE
Apply antiseizing tape to first two to five
threads of fittings prior to installation of
hoses.
(3) Install ten hoses (6) on fittings (7).
(4) Position hose (8) on fitting (9).
(5) Tighten hose (8) approximately 2 1/2 turns past
hand tight.
NOTE
Positive electrical leads are yellow. Ground
electrical leads are black.
(6) Connect thirteen ground leads (10) to terminal block
(11) terminal lugs C.
(7) Connect electrical lead (12) to terminal block (11)
terminal lug 13.
(8) Connect electrical lead (13) to terminal block (11)
terminal lug 6.
(9) Connect electrical lead (14) to terminal block (11)
terminal lug 3.
(10) Connect electrical lead (15) to terminal block (11)
terminal lug 16.
(11) Connect electrical lead (16) to terminal block (11)
terminal lug 4.
17-162
Change 2
