TM 9-2320-366-20-5
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
INITIAL SETUP
Materials/Parts
Equipment Conditions
Rag, Wiping (Item 50, Appendix D)
Disconnect batteries (TM 9-2320-366-20-3).
Dispenser, Pressure Sensitive Adhesive Tape (Item 20,
Air tanks drained (TM 9-2320-366-10-1).
Solder (Item 64, Appendix D)
Tools and Special Tools
Insulation, Sleeving, Electrical (Item 29.2 Appendix D)
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (tem 137, Appendix G)
Heater, Gun Type, Electric (Item 24, Appendix
Nut, Self-Locking (Item 133, Appendix G)
Lockwasher (8) (Item 78, Appendix G)
Sealant (Item 55.3, Appendix D)
Personnel Required
(2)
a. Removal.
(1) Remove two self-locking nuts (1), washers (2),
washers (3), and screws (4) from top cover (5).
Discard self-locking nuts.
(2) Remove eight screws (6), lockwashers (7), washers
(8), and top cover (5) from control panel (9).
Discard lockwashers.
17-157
