TM 9-2320-366-20-5
(4) Remove two screws (9), self-locking nuts (10), mounting
bracket (5), and mounting plate (11) from frame (12).
Discard self-locking nuts.
b. Front Pulley Installation.
(1) Position mounting plate (1) and mounting bracket (2) to
frame (3) with two screws (4) and self-locking nuts (5).
(2) Tighten two self-locking nuts (5) to 114-140 lb-ft (155-
190 Nm).
(3) Position two brackets (6) on mounting bracket (2) with
two screws (7) and self-locking nuts (8).
(4) Tighten two self-locking nuts (8) to 58-79 lb-ft (79-107
Nm).
(5) Install cable pulley (9) on mounting bracket (2) with
washer (10) and nut (11).
17-107