TM 9-2320-366-20-5
17-22. 15K SELF-RECOVERY WINCH (SRW) REAR ROLLER FAIRLEAD REPLACEMENT
(CONT)
b. Installation.
(1) Apply grease to straight shafts (1 and 2) and inside of
fairlead rollers (3 and 4).
CAUTION
Use a brass punch to install straight shafts. Failure
to comply may result in damage to threads for
lubrication fittings.
NOTE
Install straight shafts so that lubrication fittings
are toward curbside of vehicle.
Align hole in straight shafts with holes in
bracket.
(2) Install fairlead rollers (3 and 4) and straight shafts (1 and
2) in roller bracket (5).
(3) Install two spring pins (6) through roller bracket (5) and
straight shafts (1 and 2).
(4) Apply grease to straight shaft (7) and inside of fairlead
roller (8).
NOTE
Install straight shaft so that lubrication fitting
faces toward bottom.
Align hole in straight shaft with hole in bracket.
(5) Install fairlead roller (8) and straight shaft (7) in roller
bracket (5).
(6) Install spring pin (9) through roller bracket (5) and
straight shaft (7).
17-102