TM 9-2320-366-20-5
d. Rear Pulley Installation.
(1) Position bracket (1) on frame (2) with four screws (3)
and self-locking nuts (4).
(2) Tighten four self-locking nuts (4) to 114-140 lb-ft (155-
190 Nm).
(3) Position cable pulley (5) and mounting bracket (6) on
bracket (1) with screw (7) and self-locking nut (8).
(4) Tighten self-locking nut (8) to 114-140 lb-ft (155-190
Nm).
(5) Route 15K SRW cable (9) through rear cable pulley (5).
e. Follow-On Maintenance.
(1) Lower cab (TM 9-2320-366-10-1).
(2) Operate 15K SRW and check for proper operation (TM
9-2320-366-10-2).
(3) Reel in 15K SRW cable (TM 9-2320-366-10-2).
End of Task.
