TM 9-2320-366-20-5
This task covers:
a. Removal
d. Installation
b. Spelter Socket Removal
e. Follow-On Maintenance
c. Spelter Socket Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
15K SRW cable payed-out completely from front of
Wire, Nonelectrical (Item 72, Appendix D)
vehicle (TM 9-2320-366-10-2).
Tape, Duct (Item 67, Appendix D)
Engine shut down (TM 9-2320-366-10-1).
Adhesive (Item 10.1 Appendix D)
Spelter Socket Resin (Item 65.3, Appendix D)
Vise, Machinist (Item 48,Appendix C)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Frame, Hand Hacksaw (Item 9.1, Appendix C)
Gloves, Welder's (Item 14, Appendix C)
Blade, Hand Hacksaw (Item 3.1, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Grease, Wire Rope-Exposed Gear (Item 23.1,
Personnel Required
(3)
WARNING
Wear leather gloves at all times when
handling winch cable. Do not allow
cable to slide through hands even with
gloves on. Broken wires may cause
injury. Failure to comply may result in
injury to personnel.
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to
personnel.
a. Removal.
(1) Remove cable wedge (1) and 15K SRW cable (2)
from flange (3).
(2) Pull 15K SRW cable (2) from flange (3).
(3) Remove 15K SRW cable (2) from drum (4).
Change 2
