TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut down (TM 9-2320-366-10-1).
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Packing, Preformed (Item 193, Appendix G)
Packing, Preformed (Item 183, Appendix G)
a. Removal.
(1) Disconnect hydraulic tube (1) from tee fitting (2).
(2) Remove two nuts (3) from clamp (4).
(3) Remove clamp (4) and accumulator (5) from control
panel (6).
(4) Remove tee fitting (2) from accumulator (5).
(5) Remove cap (7) from tee fitting (2).
(6) Remove preformed packings (8 and 9) from tee fitting
(2). Discard preformed packings.
