TM 9-2320-366-20-5
This task covers:
a. Removal
d. Installation
b. Spelter Socket Removal
e. Adjustment
c. Spelter Socket Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
30K winch cable fully extended (TM 9-2320-366-10-2).
Tape, Duct (Item 67, Appendix-D)
Engine shut down (TM 9-2320-366-10-1).
Adhesive (Item 10.1, Appendix-D)
30K winch frame catwalk opened (TM 9-2320-366-10-2).
Spelter Socket Resin (Item 65.3, Appendix-
Vice, Machinist (Item 48, Appendix-C)
Tools and Special Tools
Frame, Hand Hacksaw (Item 9.1, Appendix-
Tool Kit, Genl Mech (Item 46, Appendix C)
Gloves, Welder's (Item 14, Appendix C)
Blade, Hand Hacksaw (Item 3.1, Appendix-
Grease, Wire Rope-Exposed Gear (Item 23.1, Appendix-D)
Wire, Non-Electrical (Item 72, Appendix D)
Solvent, Dry Cleaning (Item 65, Appendix-D)
Personnel Required
(3)
WARNING
Cable can become frayed or contain
broken wires. Wear heavy leather-palmed
gloves when handling cables. Frayed or
broken wires can injure hands. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Left and right side 30K winch cables are
removed the same way. Left side shown.
(1) Loosen two screws (1) on cable restraining plate
(2).
(2) Remove 30K winch cable (3) from cable restraining
plate (2).
(3) Remove 30K winch cable (3) from drum (4).
17-77
