TM 9-2320-366-20-4
16-29. INCLINOMETER REPLACEMENT
This task covers:
a. Removal
B. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-75 lb-in (Item 90, Appendix
Nuts, self-locking (2) (Item 146.1, Appendix G)
a. Removal
(1) Remove two screws (1), washers (2), and
inclinometer plate (3) from instrument panel (4).
(2) Remove two self-locking nuts (5), screws (6), and
inclinometer (7) from inclinometer plate (3). Discard
self-locking nuts.
b. Installation
(1) Install inclinometer (7) on inclinometer plate (3) with
two screws (6) and self-locking nuts (5).
(2) Position inclinometer plate (3) on instrument panel
(4)
with two washers (2) and screws (1).
(3) Tighten screws (1) to 25-30 lb-in (3 Nm).
End of Task
Change 2
16-203/(16-204 Blank)
