TM 9-2320-366-20-4
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Material/Parts
Ties, Cable, Plastic (Item 69, Appendix D)
a. Removal.
(1) Pull two spring catches (1) and lift two latch levers (2).
(2) Release two latch hooks (3) from strike plates (4).
(3) Remove PDP cover (5) from dashboard (6).
(4) Remove seven screws (7) and washers (8) from kick
panel (9).
(5) Remove kick panel (9) and stiffener (10) from dashboard
(6).
NOTE
Remove plastic cable ties as required.
(6) Disconnect air duct hose (11) from kick panel (9).
