TM 9-2320-366-20-4
16-3. KICK PANEL REPLACEMENT (CONT)
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Connect air duct hose (1) to kick panel (2).
(2) Position stiffener (3) and kick panel (2) on dashboard (4)
with seven washers (5) and screws (6).
(3) Position PDP cover (7) on dashboard (4).
(4) Fasten two latch hooks (8) on strike plates (9).
(5) Push down on two latch levers (10) until spring catches
(11) are engaged.
(6) Tighten seven screws (6) to 71-88 lb-in. (8-10 Nm).
End of Task.
16-6
