TM 9-2320-366-20-4
This task covers:
a.Removal
c. Follow-On Maintenance
b.Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Cab clearance lights removed (para 7-38).
Screwdriver Attachment, Socket Wrench (Item
Spare tire retainer and davit prepared for air drop (TM 9-
58, Appendix B)
2320-366-10-2).
Screwdriver Attachment, Socket Wrench (Item
49.1, Appendix B)
Tools and Special Tools
Sling Assembly, Air Drop Roof (TM 9-2320-366-10-2).
Material/Parts
Tool Kit, Genl Mech (Item 46, Appendix C)
Rubber Strip (Item 260, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Sealing Compound (Item 55.2, Appendix D)
Socket Set, Socket Wrench (Item 34, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Personnel Required
Dispenser, Sealant (Item 16.1, Appendix B)
(2)
a. Removal.
WARNING
Cab roof weighs approximately 110 lbs
(50 kgs). Attach a suitable lifting device
prior to removal. Failure to comply may
result in injury to personnel.
(1) Attach air drop roof sling assembly to cab roof (1).
(2) Remove four screws (2) and sun visor (3) from cab
roof (1).
Change 2
