TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Material/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Washer, Spring (2) (Item 289, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Washer, Spring (2) (Item 296, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix
Nut, Self-Locking (6) (Item 128, Appendix G)
Lockwasher (4) (Item 112, Appendix G)
Wrench Set, Socket (Item 51, Appendix C)
NOTE
Vehicle serial numbers 0001 through 2359
were not originally equipped with gladhand
selector valves. Vehicle serial numbers 2360
and higher are equipped with gladhand
selector valves. M1088 without gladhand
selector valves shown.
a. Removal.
(1) Remove four self-locking nuts (1), screws (2) and
mounting bracket (3) from platform (4). Discard self-
locking nuts.
NOTE
Tag wires and connection points prior to
disconnecting.
(2) Remove two nuts (5), spring washers (6), screws (7),
and dust cap lanyards (8) from mounting bracket (3).
Discard spring washers.
(3) Remove two nuts (9), spring washers (10), and
connectors P134 (11) and P133 (12) from mounting
bracket (3). Discard spring washers.
Change 1
