TM 9-2320-366-20-4
NOTE
Step (4) requires the aid of an assistant.
(4) Remove four self-locking nuts (7), screws (8) and upper
platform (9) from platform (10). Discard self-locking nuts.
b. Disassembly
NOTE
Perform steps (1) through (11) on vehicles
not equipped with gladhand selector valves.
(1) Remove two self-locking nuts (1), screws (2) and metal
floor plates (3) from platform (4). Discard self-locking
nuts.
(2) Disconnect hose (5) from fitting (6).
(3) Disconnect hose (7) from fitting (8).
(4) Disconnect two gladhands (9) from dummy connectors
(10).
(5) Disconnect mounting ring (11) from eye ring (12).
14-49
