TM 9-2320-366-20-4
(15) Position brace (1) on cargo bed (16) with screw (12) and
self-locking nut (13).
(16) Tighten self-locking nut (13) to 47 lb-ft (64 Nm).
(17) Route rear lights cable assembly (14) through right frame
rail (15).
NOTE
Perform steps (18) through (22) on M1090
and M1094 without 15K SRW.
(18) Position brace (1) on right taillight carrier (17) with two
bolts (3) and self-locking nuts (4).
(19) Tighten two self-locking nuts (4) to 47 lb-ft (64 Nm).
NOTE
Step (20) requires the aid of an assistant.
(20) Position right taillight carrier (17) on bracket (6) with four
screws (18) and self-locking nuts (19).
(21) Position bracket (1) on right fender brace (11) with screw
(12) and self-locking nut (13).
(22) Tighten self-locking nut (13) and four self-locking nuts
(19) to 39-55 lb-ft (59-69 Nm).
Change 1
14-42.1/(14-42.2 Blank)
