TM 9-2320-366-20-4
Section II. MAINTENANCE PROCEDURES
This task covers:
a. Removal
c. Follow-On Maintenance
b. Cleaning/Inspection
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1)
Cap and Plug Set (Item 15, Appendix D0
Cab raised (TM 9-2320-366-10-1)
Oil, Lubricating, OE/HDO 10 (Item 43, Appendix D)
Power steering pump reservoir drained
Head, Fluid Filter (Item 55.1, Appendix G)
Seal, Nonmetallic (Item 270.1, Appendix G)
Personnel Required
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
(2)
Tool Kit, Genl Mech (Item 44, Appendix C)
Pan, Drain (Item 24, Appendix C)
CAUTION
Cap or plug hydraulic connections to prevent
contamination of power steering system.
Failure to comply may result in damage to
equipment.
a. Removal.
(1) Remove cap (1) from power steering reservoir (2).
(2) Press down and turn filter assembly tee-handle (3)
counter clockwise to remove.
(3) Remove filter assembly (3) from power steering
reservoir (2).
(4) Remove seal (4) from cap (1). Discard seal.
Change 2
