TM 9-2320-366-20-4
13-8. POWER STEERING PUMP RESERVOIR AND BRACKET REPLACEMENT (CONT)
NOTE
Minimum allowable gap on clamp is 0.2 in.
(5 mm). If gap is less than 0.2 in. (5 mm),
remove and re-install clamp.
(22) Measure gap on clamp (21).
c. Follow-On Maintenance.
(1) Install auxiliary starter solenoid (para 7-6).
(2) Fill power steering pump reservoir (Appendix H).
(3) Lower cab (TM 9-2320-366-10-1).
(4) Start engine (TM 9-2320-366-10-1).
(5) Check power steering system for smooth operation
of steering wheel and wheels.
(6) Shut down engine (TM 9-2320-366-10-1).
(7) Raise cab (TM 9-2320-366-10-1).
(8) Check fluid level in power steering pump reservoir
(TM 9-2320-366-10-1).
(9) Lower cab (TM 9-2320-366-10-1).
End of Task.
Change 2
