TM 9-2320-366-20-4
c. Installation.
(1) Install spline adapter (1) on power steering pump (2).
(2) Install preformed packings (3 and 4) on 90-degree
fittings (5 and 6).
(3) Install 90-degree fittings (5 and 6) in power steering
pump (2).
CAUTION
Spline adapter must be installed properly into
groove of air compressor. Failure to comply
may result in damage to equipment.
(4) Position gasket (7) and power steering pump (2) on air
compressor (8) with two washers (9) and bolts (10).
(5) Tighten two bolts (10) to 43-52 lb-ft (58-71 Nm).
Change 1
13-35
