TM 9-2320-366-20-4
This task covers:
a. Removal
c. Installation
b. Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Pan, Drain (Item 24, Appendix C)
Cab raised (TM 9-2320-366-10-1).
Socket Wrench Attachment, Screwdriver (Item 49,
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Goggles, Industrial (Item 15, Appendix C)
Cap and Plug Set (Item 14, Appendix D)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix
Gasket, (Item 29.3, Appendix G)
Packing, Preformed (Item 187, Appendix G)
Dispensing Pump, Hand Driven (Item 5,
Packing, Preformed (Item 184, Appendix G)
Dispenser, Pressure Sensitive Adhesive Tape (Item
Wrench, Adjustable (Item , Appendix C)
30, Appendix C)
a. Removal.
(1) Remove fluid from power steering reservoir (1).
CAUTION
Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Tag hoses, tubes and connection points prior
to disconnecting.
(2) Loosen clamp (2) on hose (3).
(3) Disconnect hose (3) from tube (4).
(4) Disconnect hose (5) from 90-degree fitting (6).
(5) Remove tube (4) from 90-degree fitting (7).
Change 1
