TM 9-2320-366-20-4
(3) Disconnect connector P52F (6) from connector J52 (7).
(4) Remove eight screws (8) from front bumper (9).
NOTE
Steps (5) and (6) require the aid of an
assistant.
(5) Remove two pins (10) and shackles (11) from supports
(12).
WARNING
Front bumper weighs approximately 100
lbs (45 kgs). Use the aid of an assistant
to remove front bumper.
Failure to
comply may result in injury to personnel.
(6) Remove front bumper (9) from vehicle.
(7) Remove two self-locking nuts (13), lockwashers (14),
screws (15), and intervehicular 12 vdc (7 pin) cable (16)
from front bumper (9). Discard self-locking nuts and
(8) Remove four self-locking nuts (17), screws (18), and two
side markers (19) from front bumper (9). Discard self-
locking nuts.
Change 1
14-3
