TM 9-2320-366-20-4
NOTE
Perform steps (5) and (6) on brackets
mounted on inside of frame bracket.
(5) Position bracket (5) on frame bracket (1) with two
screws (9) and self-locking nuts (10).
(6) Tighten two self-locking nuts (4) to 35-39 lb-ft (47-
53 Nm).
(7) Position power steering pump reservoir (11)
in bracket (5).
(8) Tighten screw (12) on clamp (13).
(9) Loosen screw (14) in clamp (15) as far as possible
without disengaging screw (14) from D-nut (16).
(10) Unhook clamp tabs (17) from tab windows (18).
Change 2
