TM 9-2320-366-20-4
This task covers:
a. Return Hose Removal
e. Suction Hose and Tube Removal
b. Return Hose Installation
f. Suction Hose and Tube Installation
c. Pressure Hose Removal
g. Follow-On Maintenance
d. Pressure Hose Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
Cab raised (TM 9-2320-366-10-1).
Power steering reservoir drained (Appendix H)
Materials/Parts
Cap and Plug Set (Item 13, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Oil, Lubricating, OE/HDO 10 (Item 42, Appendix D)
Goggles, Industrial (Item 15, Appendix C)
Nut, Self-Locking (2) (Item 150, Appendix G)
Dispensing Pump, Hand Driven (Item 5,
Clamp (Item 8, Appendix G)
Clamp (Item 9, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Return Hose Removal.
CAUTION
Cap or plug hydraulic connections to prevent
contamination of power steering system.
Failure to comply may result in damage to
equipment.
(1) Loosen hose clamp (1) on return hose (2).
(2) Disconnect return hose (2) from steering gear box
(3).
Change 2
