TM 9-2320-366-20-4
NOTE
Remove plastic cable ties as required.
(9) Remove two self-locking nuts (7), screws (8), and
clamps (9) from return hose (2). Discard self-
locking nuts.
(10) Remove return hose (2) from vehicle.
b. Return Hose Installation.
(1) Install hose clamp (1) and return hose (2) on steering
gear box (3).
(2) Loosen screw (4) in clamp (5) as far as possible
without disengaging screw from D-nut (6).
(3) Unhook clamp tabs (7) from tab windows (8).
Change 2
13-17