TM 9-2320-366-20-4
13-6. STEERING COLUMN REPLACEMENT (CONT)
(6) Connect steering gear universal joint (5) to steering gear
input shaft (6).
(7) Position bolt (7) and locknut (8) on steering gear arm
universal joint (5).
(8) Tighten locknut (8) to 32-39 lb-ft (43-53 Nm).
(9) Position four screws (9), eight washers (10), and four
self-locking nuts (11) in steering column assembly (2).
(10) Tighten four self-locking nuts (11) to 71-88 lb-in. (8-10
Nm).
(11) Lower cab (TM 9-2320-366-10-1).
c. Follow-On Maintenance.
(1) Install turn signal arm assembly (para 7-26).
(2) Start engine (TM 9-2320-366-10-1).
(3) Operate vehicle and check for proper operation of
steering and turn signal assemblies (TM 9-2320-366-10-
1).
(4) Shut down engine (TM 9-2320-366-10-1).
End of Task.
13-14
