TM 9-2320-366-20-4
13-4. TIE-ROD REPLACEMENT (CONT)
b. Disassembly.
NOTE
Count exposed threads on tie rod end to assist
in installation.
Note orientation of clamp on tie rod end prior to
removal.
Left and right tie rod ends are removed the
same way. Left side shown.
(1) Loosen nut (1) on tie rod clamp (2).
(2) Remove tie rod end (3) from tie rod (4). Discard tie rod
end.
c. Assembly.
NOTE
Use number
of
threads
counted
from
disassembly.
Left and right tie rod ends are installed the same
way. Left side shown.
(1) Position tie rod end (1) on tie rod (2) with same number
of threads showing as from removal.
(2) Tighten nut (3) on tie rod clamp (4) to 140-180 lb-ft (190-
244 Nm).
Change 1
