TM 9-2320-366-20-4
13-3. DRAG LINK REPLACEMENT (CONT)
(5) Install drag link (1) in pitman arm (5).
(6) Position slotted nut (6) on drag link (1).
(7) Lower cab (TM 9-2320-366-10-1).
(8) Start engine (TM 9-2320-366-10-1).
(9) Turn steering wheel until wheels are straight (TM 9-
2320-366-10-1).
(10) Shut down engine (TM 9-2320-366-10-1).
(11) Raise cab (TM 9-2320-366-10-1).
(12) Tighten slotted nut (6) to 139-171 lb-ft (188-232 Nm).
NOTE
If slots in slotted nut do not line up with cotter
pin hole in drag link, tighten slotted nut until
slots and cotter pin hole are aligned.
(13) Install cotter pin (7) in drag link (1).
e. Follow-On Maintenance.
(1) Lower cab (TM 9-2320-366-10-1).
(2) Perform front wheel toe-in alignment (para 13-5).
(3) Start engine (TM 9-2320-366-10-1).
(4) Check steering system for smooth operation.
(5) Shut down engine (TM 9-2320-366-10-1).
End of Task.
13-6
Change 1
