TM 9-2320-366-20-4
Section II. MAINTENANCE PROCEDURES
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Puller Kit, Mechanical (Item 27, Appendix C)
Tools and Special Tools
Materials/Parts
Tool Kit, Genl Mech (Item 46, Appendix C)
Screw, Cap, Socket Head (2) (Item 54, Appendix
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
a. Removal.
(1) Remove steering wheel nut cover (1) from steering
wheel (2).
(2) Remove nut (3) from steering column (4).
(3) Match mark steering wheel (2) to steering column
(4).
(4)
Install two screws (5) and puller on steering wheel
(2).
(5)
Remove steering wheel (2) from steering column
(4).
(6)
Remove two screws (5) and puller from steering
wheel (2).
