TM 9-2320-366-20-4
QUICK RELEASE VALVE AND BRACKET REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Antiseize Compound (Item 58, Appendix D)
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Intermediate and rear axle quick release valves
are removed the same way. Inter-mediate axle
quick release valve shown.
Tag air hoses and connection points before
disconnecting.
(1) Disconnect three air hoses (1) from quick release valve
(2).
(2) Remove two nuts (3), washers (4), screws (5), washers
(6), and quick release valve (2) from vehicle.
Change 1
