TM 9-2320-366-20-4
12-9. INTERMEDIATE AND REAR AXLE CENTRAL TIRE INFLATION SYSTEM (CTIS)
QUICK RELEASE VALVE AND BRACKET REPLACEMENT (CONT)
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(2) Apply antiseize compound to threads of two 45-degree
fittings (7) and 90-degree fitting (8).
(3) Install two 45-degree fittings (7) and 90-degree fitting (8)
in quick release valve (9).
(4) Install quick release valve (9) on vehicle with two
washers (10), screws (11), washers (12), and nuts (13).
(5) Connect three air hoses (14) to quick release valve (9).
c. Follow-On Maintenance.
(1) Start engine and allow enough time for air pressure to
reach normal operating pressure (TM 9-2320-366-10-1).
(2) Check quick release valve for air leaks.
(3) Shut down engine (TM 9-2320-366-10-1).
End of Task.
