TM 9-2320-366-20-4
d. Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of three 90-degree
fittings (1).
CAUTION
Do not overtighten fittings. Failure to comply
may result in damage to equipment.
(2) Install three 90-degree fittings (1) in manifold valve
assembly (2).
(3) Install bracket (3) on manifold valve assembly (2) with
four washers (4) and screws (5).
(4) Position manifold valve assembly (2) on cab (6) with four
screws (7).
(5) Tighten four screws (7) to 120 lb-in. (14 N m).
NOTE
Install plastic cable ties as required.
(6) Install three air hoses (8) on 90-degree fittings (1).
(7) Connect connector P112 (9) to manifold valve assembly
(2).
(8) Connect connector P113 (10) to manifold valve assembly
(2).
Change 1
