TM 9-2320-366-20-4
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-On Maintenance
c. Assembly
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Kick panel removed (para 16-3).
Antiseize Compound (Item 58, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
NOTE
Tag air hoses and connection points prior to
disconnecting.
(1) Disconnect connector P113 (1) from manifold valve
assembly (2).
(2) Disconnect connector P112 (3) from manifold valve
assembly (2).
(3) Disconnect three air hoses (4) from 90-degree fittings
(5).
(4) Remove four screws (6) and manifold valve assembly (2)
from cab (7).
Change 1
