TM 9-2320-366-20-4
12-5. CENTRAL TIRE INFLATION SYSTEM (CTIS) HOSE ASSEMBLIES, MANIFOLD
VALVE, KNEELING VALVE AND BRACKET REPLACEMENT (CONT)
NOTE
Perform steps (19) and (20) if wheel is
mounted on vehicle.
(19) Position CTIS hose (17) on hollow wheel stud (18)
with two seals (19) and banjo bolt (20).
NOTE
Place a screwdriver behind CTIS hose
assembly while tightening banjo bolt to keep
CTIS hose assembly from contacting wheel
studs.
(20) Tighten banjo bolt (20) to 22-28 lb-ft (30-38 Nm).
NOTE
Perform steps (21) and (22) if wheel will be
installed in spare tire retainer.
(21) Position two seals (19), screw (21), and nut (22) on
CTIS hose (17).
(22) Tighten nut (22) to 22-28 lb-ft (30-38 Nm).
(23) Install valve core (23) in CTIS manifold valve (12).
(24) Install valve cap (24) on CTIS manifold valve (12).
c. Follow-On Maintenance.
(1) Install rim cover, if equipped (Para 12-10).
(2) Start engine (TM 9-2320-366-10-1) and allow time for
CTIS to inflate tire.
(3) Shut down engine (TM 9-2320-366-10-1).
(4) Check for air leaks around CTIS hoses, CTIS manifold
valve assembly, and kneeling valve or hose adapter.
End of Task.
Change 2
