TM 9-2320-366-20-4
11-34. M1088 TRAILER STOPLIGHT SWITCH REPLACEMENT (CONT)
b. Installation.
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep
away from open fire and use in a well-
ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of trailer stoplight
switch (1).
(2) Install trailer stoplight switch (1) in tee fitting (2).
(3) Install terminal lugs TL501 (3) and TL502 (4) on terminal
studs (5 and 6) with two lockwashers (7) and nuts (8).
c. Follow-On Maintenance.
(1) Install kick panel (para 16-3).
(2) Connect batteries (para 7-57).
(3) Start engine and allow air pressure to raise to normal
levels (TM 9-2320-366-10-1).
(4) Operate trailer brake and check for proper operation and
for air leaks (TM 9-2320-366-10-1).
End of Task.
