TM 9-2320-366-20-4
11-33. M1088 GLADHAND SELECTOR VALVE REPLACEMENT (CONT)
d. Emergency Gladhand Selector Valve Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of reducer fitting
(1), 90-degree fitting (2), bushing (3), bushing (4), and
90-degree fitting (5).
(2) Install reducer fitting (1) in emergency gladhand selector
valve (6).
(3) Install 90-degree fitting (2) in emergency gladhand
selector valve (6).
(4) Install bushing (3) in 90-degree fitting (2).
(5) Install bushing (4) in emergency gladhand selector valve
(6).
(6) Install 90-degree fitting (5) in bushing (4).
(7) Install emergency gladhand selector valve (6) in tubing
connector (7).
(8) Connect trailer emergency gladhand air hose (8) to
bushing (3).
(9) Connect emergency gladhand air hose (9) to 90-degree
fitting (5).
11-202
