TM 9-2320-366-20-4
12-2. WHEEL REPAIR (CONT)
(4) Lay tire (1) on its side.
(5) Position valve (6) and nut (7) on inside wheel
section (8).
(6) Tighten nut (7) to 175-200 lb-in. (20-23 Nm).
(7) Install inside wheel section (8) in tire (1).
(8) Turn tire (1) over.
(9) Install preformed packing (9) on inside wheel section
(8).
(10) Install outside wheel section (10) on inside wheel
section (8).
(11) Position 20 nuts (11) on wheel section (10).
(12) Tighten 20 nuts (11) to 210-240 lb-ft (285-325
Nm) in sequence shown.
c. Follow-On Maintenance.
(1) Inflate tire to 55 psi (379 kPa) (TM 9-2610-200-14).
(2) Install tire (TM 9-2320-366-10-2).
(3) Tighten wheel studs (para 12-4).
(4) Install CTIS hose assemblies, manifold valve,
kneeling valve and bracket (para 12-5).
End of Task.
Change 2
