TM 9-2320-366-20-4
(10) Position load sensing valve (2) on bracket (5) with two
washers (6), two screws (7) and self-locking nuts (8).
(11) Tighten two self-locking nuts (8) to 14-18 lb-ft (20-24
Nm).
NOTE
Perform step (12) on all models except M1088.
Begin by using holes furthest left on
crossmember. Final position will be determined
during load sensing valve adjustment.
(12) Position load sensing valve (2), bracket (5), and spacer
(9) on crossmember (10) with two screws (11) and self-
locking nuts (12).
Change 1
11-63
