TM 9-2320-366-20-4
11-10. LOAD SENSING VALVE AND CONTROL CABLE REPLACEMENT/ADJUSTMENT
(CONT)
d. Load Sensing Valve Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of 45-degree fitting
(1).
(2) Install 45-degree fitting (1) in load sensing valve (2).
(3) Deleted.
NOTE
Perform steps (4) and (5) on all models
except M1088 and M1089.
(4) Apply antiseize compound to threads of tee fitting (3).
(5) Install tee fitting (3) in load sensing valve (2).
(6) Deleted.
NOTE
Perform steps (7) and (8) on M1088 and
M1089.
(7) Apply antiseize compound to threads of 45-degree fitting
(4).
(8) Install 45-degree fitting (4) in load sensing valve (2).
(9) Deleted.
11-62
Change 1
