TM 9-2320-366-20-4
This task covers:
a. Load Sensing Valve Control Cable Removal
d. Load Sensing Valve Installation
b. Load Sensing Valve Control Cable Installation
e. Load Sensing Valve Adjustment
c. Load Sensing Valve Removal
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts (Cont)
Engine shut down (TM 9-2320-366-10-1).
Antiseize Compound (Item 58, Appendix D)
Air tanks drained (TM 9-2320-366-10-1).
Adhesive (Item 3, Appendix D)
Tee, Pipe (Item 68.1, Appendix D)
Nut, Self-Locking (2) (Item 167, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
References
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
TM 9-4910-571-12 & P
STE/ICE-R (Item 39, Appendix C)
Personnel Required
(2)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item 20,
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Load Sensing Valve Control Cable Removal.
(1) Loosen jam nut (1) on cable clamp (2).
(2) Loosen screw (3) on cable clamp (2).
(3) Remove load sensing valve control cable (4) from cable
clamp (2).
Change 1
