TM 9-2320-366-20-4
(5) Position left bracket (5) and right bracket (6) on brake
foot pedal (7).
(6) Lubricate pivot point of brake foot pedal (7) with MIL-G-
21164 grease.
NOTE
Bushings (8) shall be press fitted on
installation.
(7) Install two bushings (8) on left bracket (5) and right
bracket (6).
(8) Position brake foot pedal (7) and foot control valve (4) on
bracket (9) with two screws (10), washers (11), and self-
locking nuts (12).
(9) Position two screws (13), washers (14), and self-locking
nuts (15) in foot control valve (4).
(10) Tighten two self-locking nuts (12 and 15) to 18 lb-ft (24
Nm).
(11) Install spring (16) on bracket (9) and brake foot pedal
(7).
(12) Install foot control linkage (17), on brake foot pedal (7)
with pin (18), washer (19), and cotter pin (20).
Change 1
11-53
