TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Cap and Plug Set (Item 14, Appendix D)
Pan, Drain (Item 24, Appendix C)
Packing, Preformed (2) (Item 178.1, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Packing, Preformed (2) (Item 179, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Nut, Self-Locking (4) (Item 161, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Nut, Self-Locking (10) (Item 154, Appendix G)
Wrench Set, Socket (Item 51, Appendix C)
Nut, Self-Locking (4) (Item 150, Appendix G)
Wrench, Box and Open End (Item 54, Appendix C)
Nut, Self-Locking (8) (Item 167, Appendix G)
Wrench, Box and Open End (Item 55, Appendix C)
Washer, Spring (8) (Item 292, Appendix G)
Crow foot Attachment, Socket Wrench (Item 12.1,
Personnel Required
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
(2)
Socket Set, Socket Wrench (Item 34, Appendix C)
WARNING
Wear appropriate eye protection when working under vehicle due to the
possibility of falling debris. Failure to comply may result in injury to
personnel.
Ensure exhaust system is cool before preforming maintenance. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
Cap or plug hoses and fittings when disconnecting to prevent contamination of
transmission oil. Failure to comply may result in damage to equipment.
NOTE
Tag hoses and fittings prior to disconnecting.
Remove plastic cable ties as required.
Change 1
