TM 9-2320-366-20-4
8-12. M1088 TRANSMISSION AUXILIARY OIL COOLER AND BRACKET
REPLACEMENT (CONT)
(1) Remove two self-locking nuts (1), washers (2), and
screws (3) from heat shield (4). Discard self-locking
nuts.
(2) Remove two self-locking nuts (5), spring washers (6),
washers (7), screws (8), washers (9), and heat shield (4)
from transmission auxiliary oil cooler (10). Discard self-
locking nuts and spring washers.
(3) Disconnect transmission auxiliary oil cooler hoses (11
and 12) from 90-degree fittings (13 and 14).
(3.1) Loosen two jam nuts (14.1) on 90-degree fittings (13 and
14).
NOTE
Note orientation of 90-degree fittings prior to
removal.
(4) Remove 90-degree fittings (13 and 14) from transmission
auxiliary oil cooler (10).
NOTE
Perform step (5) on vehicles equipped with
transmission oil cooler tubes.
(5) Remove two preformed packings (15) from 90-degree
fittings (13 and 14). Discard preformed packings.
NOTE
Perform step (5.1) on vehicles equipped with
transmission oil cooler hoses.
(5.1) Remove two preformed packings (15 and 16) from 90-
degree fittings (13 and 14). Discard preformed packings.
8-52
Change 1
