TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Dump body raised to maintenance position (TM 9-
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix
2320-366-10-1).
Batteries disconnected (para 7-57).
Kick panel removed (para 16-3).
Materials/Parts
Lower radiator fan shroud removed (para 6-4).
Ties, Cable, Plastic (Item 69, Appendix D)
Gravel deflector and gravel deflector extension
Nut, Self-Locking (5) (Item 128, Appendix G)
removed (para 14-13).
Deleted
Tools and Special Tools
Personnel Required
Tool Kit, Genl Mech (Item 46, Appendix C)
(2)
Goggles, Industrial (Item 15, Appendix C)
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector J108 (1) from connector P108 (2).
(2) Remove grommet (3) from cab (4).
(3) Remove dump power cable assembly (5) from grommet
(3).
(4) Raise cab (TM 9-2320-366-10-1).
NOTE
Steps (5) through (18) require the aid of an
assistant.
Note routing of cable assembly prior to removal.
(5) Remove dump power cable assembly (5) from cab (4).
Change 1
