TM 9-2320-366-20-4
7-114. M1089 HYDRAULIC SYSTEM SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Install hydraulic system solenoid cable (1) through
compression nut (2), washer (3), and connector (4).
(2) Install compression nut (2) on connector (4).
(3) Install quick disconnect terminal (5) on black wire (6).
(4) Install terminal lug (7) on white wire (8).
(5) Install quick disconnect terminal (5) on ground strip (9)
position 17.
(6) Install terminal lug (7) on terminal block (10) position 5
with screw (12).
(7) Apply varnish to quick disconnect terminal (5) and
terminal lug (7).
7-572
