TM 9-2320-272-24-4
Remove mainshaft and pinion gear assembly (4) from differential carrier housing (11).
18.
NOTE
Tag and retain shims for measurement and installation.
Using bearing remover, remove shims (19) from front of differential carrier housing (11).
19.
Remove bearing (18) from rear of differential carrier housing (11).
20.
Place mainshaft (4) in soft-jawed vise.
21.
Using puller, remove rear bearing race (24) from rear of mainshaft (4).
22.
Open tab(s) on locktab washer (21) and remove outer nut (20), locktab washer (21), keywasher (22),
23.
and inner nut (23) from mainshaft (4). Discard locktab washer (21).
5-435
