TM 9-2320-272-24-4
11.
Remove two cotter pins (l), nuts (2), and companion flanges (3) from mainshaft (4). Discard cotter
pins (1).
12.
Remove six screws (9) and lockwashers (10) from rear bearing cover (8). Discard lockwashers (10).
13.
Remove rear bearing cover (8), gasket (6), and thrust washer (5) from differential carrier
housing (11). Discard gasket (6).
Remove oil seal (7) from rear bearing cover (8). Discard oil seal (7).
14.
15.
Remove eight screws (16) and washers (17) from front bearing cover (13).
16.
Remove front bearing cover (15) and gasket (12) from differential carrier housing (11). Discard
gasket (12).
17.
Using puller, remove oil seal (13) and gasket (14) from front bearing cover (15). Discard oil seal (13)
and gasket (14).
5-434
