TM 9-2320-272-24-1
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
EQUIPMENT CONDITION (Contd)
Floodlight control switch removed (para. 3-120).
All
Pressure gauge removed (para. 3-86).
TOOLS
Steering wheel removed (para. 3-226).
Cold-start indicator and lamp removed
General mechanic's tool kit (Appendix E, Item 1)
REFERENCES (TM)
Engine stop and throttle control cable removed
TM 9-2320-272-10
Turn signal flasher removed (para. 3-114).
TM 9-2320-272-24P
Instrument panel circuit breaker removed
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
Windshield wiper pump removed (para. 3-281).
Windshield wiper hoses removed (para. 3-282).
Battery ground cables disconnected
Heater control box removed (para. 3-295).
Personnel heater control cables removed
Instrument cluster removed (para. 3-83).
(para. 3-294).
Electrical switches removed (para. 3-107).
Fuel selector valve switch removed
NOTE
It may be necessary to remove the upper steering column. If so,
notify DS maintenance.
1.
Remove
two screws (5) from instrument panel (4) and bracket (7).
2.
Remove
five screws (3) from instrument panel (4).
3.
Remove
four screws (2) from instrument panel (4).
4.
Remove
two screw-assembled washers (1) from instrument panel (4).
5.
Remove
screw (6) from instrument panel (4).
NOTE
Assistant will help with step 5.
6.
Remove instrument panel (4) from cab (8) and brackets (7) and (9).
NOTE
Assistant will help with step 1.
1.
Position instrument panel (4) on cab (8) and brackets (7) and (9).
2.
Install screw (6) on instrument panel (4).
3.
Install two screw-assembled washers (1) on instrument panel (4).
4.
Install four screws (2) on instrument panel (4).
5.
Install five screws (3) on instrument panel (4).
6.
Install two screws (5) on instrument panel (4) and bracket (7).
3-248
