TM 9-2320-272-24-1
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
Hood raised and secured (TM 9-2320-272-10).
Battery ground cables disconnected (para. 3-126).
NOTE
Perform steps 1 and 2 to remove circuit breakers located on
engine firewall.
Perform steps 3 and 4 to remove circuit breakers located behind
instrument panel and above steering column.
Tag wires for installation
1.
Disconnect wires (4) and (5) from circuit breaker (2).
2.
Remove two screws (3) and circuit breaker (2) from firewall (1).
3.
Disconnect wires (6) and (7) from circuit breaker (9).
4.
Remove two screws (10) and circuit breaker (9) from instrument panel brace (8).
NOTE
Perform steps 1 and 2 to install circuit breakers on engine
firewall.
Perform steps 3 and 4 to install circuit breakers behind
instrument panel.
1.
Install circuit breaker (2) on firewall (1) with two screws (3).
2.
Connect wires (5) and (4) to circuit breaker (2).
3.
Install circuit breaker (9) on instrument panel brace (8) with two screws (10).
4.
Connect wires (7) and (6) to circuit breaker (9).
3-288
